The lower link arms of a tractor’s three-point hitch are the primary structural members transmitting draft forces from mounted implements to the tractor chassis. They are subject to shock loading, bending, and torsional stress every time an implement hits a rock or the hitch is raised with a full load — which is why cast lower link arms with correct geometry and sound metallurgy consistently outperform fabricated plate weldments in fatigue life.
Ningbo Ruican produces three-point hitch lower link arms by investment casting in C45E (AISI 1045 equivalent) medium carbon steel. The process reproduces the complex curved profile, progressive section changes, and integrated boss features of the original design in a single casting — no welds, no stress concentration at joints, no multi-part assembly.
After casting, link arms are normalized, shot blasted, and CNC machined at the pin eyes and bushing bores to guarantee correct clearances for Category 1, 2, or 3 hitch geometry. Threaded features and wear bushings can be supplied fitted per customer requirement. Compatible with tractors from 25 HP compact models to 200 HP agricultural and utility tractors, for both OEM production lines and aftermarket distributors.
Key Specifications
| Parameter | Specification |
|---|---|
| Material | C45E medium carbon steel (AISI 1045 / DIN 1.1191 equivalent) |
| Manufacturing Process | Water glass or silica sol investment casting + CNC machining |
| Heat Treatment | Normalized (160–210 HB); induction hardening of bores on request |
| Casting Tolerance | ISO 8062 CT5–CT6 |
| Hitch Categories | Category 1, 2, and 3 (DIN 9674 / ASAE S217) |
| Finish | Shot blasted, black primer or e-coat per specification |
| Inspection | CMM verification of pin-eye center distance, EN 10204 3.1 certificate |
| MOQ | Flexible — from 100-piece aftermarket runs to full OEM volumes |
| Optional Features | Fitted bronze or hardened steel bushings, sway-limit chains, ball ends |
Why Lower Link Arms Fail — and How Casting Prevents It
Field failures in lower link arms almost always start at weld toes or at abrupt section transitions in fabricated designs. Investment casting allows the arm to be shaped with generous fillets and tapered sections that follow the stress flow, and the wrought-like grain structure of a steel casting in C45E provides consistent strength along the full length of the arm. For aftermarket distributors, this means measurably fewer warranty claims on the most-abused part of the hitch.
Why Choose Ningbo Ruican
- 17+ years supplying hitch and linkage components to agricultural machinery OEMs
- IATF 16949 certified — process discipline that carries over to every farm equipment program
- Full-range hitch hardware: lower links, lift rods, top links, ball joints, and yokes from one supplier
- Kitted aftermarket solutions: matching left/right arm pairs packed as ready-to-sell sets
- Drawings or samples accepted: we reverse-engineer from used parts when drawings are unavailable
Отзывы
Отзывов пока нет.